All
.Net
AD DS
AD FS
Atlassian
BGP
C#
Dell PowerEdge
Exchange
Fax Server
FreeBSD
General
Hype-Jargon
IBM X3650
IEEE 802.11 WLAN
IPv4 | IPv6
Let's Encrypt
Linux
Microsoft Azure
Microsoft Teams
OAuth2.0
Office 365
OpenID Connect
pfSense
PostgreSQL
PowerShell
SAML 2.0
Security
Session Border Controller (SBC)
SQL Server
System Center
TLS/SSL
Visual Studio
VPN
Web server
Windows
X.509 PKI
Wireless 802.11 RADIUS Authentication over Site-to-Site IPSec VPN Tunnel failed
In my post below I will show how to set up a lean branch office network without any servers and...
Numbering the IPv4 and IPv6 WAN Link between ISP and Customer
In this post I want to show the different alternatives Internet Service Provider (ISP) can use to numbering their IPv4 and...
pfSense Boot Loop after Power Outage
A few weeks ago I installed pfSense 2.5.2 on a kettop Mi4005L Mini PC. This Mini PC uses an Aptio...
Set up a lean Branch Office Network without any Servers and DCs inside by using an IPSec S2S VPN Tunnel connected with the Headquarters Network
If you want to set up a network in a branch office and don’t want to deploy any servers inside...
Set up an internal LAN and Perimeter Network with public IPv6 Addresses and pfSense
In this post we will see how to set up an internal LAN and perimeter network with public IPv6 addresses,...
pfSense – enable the Thermal Sensors to display the CPU Temperature on the Dashboard
By default in pfsense only ACPI-compliant motherboard sensor is enabled. Advanced Configuration and Power Interface (ACPI)https://en.wikipedia.org/wiki/Advanced_Configuration_and_Power_Interface If the actual temperature from...